Skip to content
EPCMap

EPC ratings in CM1, Chelmsford

Postcode district in Chelmsford

Summary

Average rating

C70

Chelmsford average: D 68

Homes in CM1 have an average EPC rating of C (70), a little above the Chelmsford average of D (68).

CM1 has the highest average rating of the 3 postcode districts in Chelmsford. Flats and maisonettes rate best here, at C (75) on average; semi-detached houses rate lowest, at D (66).

Rated D or worse
40%
Chelmsford: 46%
Typical yearly energy cost
£859
EPCs since 2021, at prices then
Built before 1930
8%

For landlords: 50% of privately rented homes here are below C (2,629 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the Chelmsford average.

  • Band A, score 92 to 100: <1% of homes; Chelmsford <1%.
  • Band B, score 81 to 91: 22% of homes; Chelmsford 17%.
  • Band C, score 69 to 80: 37% of homes; Chelmsford 36%.
  • Band D, score 55 to 68: 30% of homes; Chelmsford 33%.
  • Band E, score 39 to 54: 9% of homes; Chelmsford 10%.
  • Band F, score 21 to 38: 2% of homes; Chelmsford 2%.
  • Band G, score 1 to 20: <1% of homes; Chelmsford <1%.

Based on the latest energy performance certificate (EPC) for each of 24,527 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100.

Find the EPC for a home in CM1 → Search any address on the official EPC register on GOV.UK. Certificates are free to view and last 10 years. Need a new EPC in CM1? → You need one to sell or let a home. GOV.UK explains how to find an accredited assessor.

Postcode sectors in CM1

Smaller areas within CM1, each with its own page. They're also on the map.

Sectors with fewer than 30 homes on the EPC register aren't shown.

What homes here are like

What EPC assessors recorded when they visited homes in CM1.

Main heating

Gas boiler77%
Electric storage heaters6%
Other electric heating6%
Communal or district heating5%
Oil boiler3%
Heat pump1%
Other or unrecorded1%

Walls, roof and windows

Solid walls, not insulated11%
Cavity walls, not insulated15%
Cavity walls, insulated43%
Solid walls, insulated2%
Other walls (timber, system-built or modern)30%
Loft insulation under 100 mm (homes with a loft)17%
Double or triple glazing throughout93%
Solar panels1%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house16%D 68Chelmsford: D 6652%
Semi-detached house22%D 66Chelmsford: D 6554%
Terraced house21%D 68Chelmsford: D 6746%
Bungalow6%D 63Chelmsford: D 6263%
Flat or maisonette35%C 75Chelmsford: C 7420%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

50%

of privately rented homes here are below C (2,629 homes)

Chelmsford: 52%

  • 92% of those could reach C with the upgrades listed on their EPC.
  • 1% are rated F or G, below today's minimum of E (Chelmsford: 1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in CM1

Upgrades that are unusually common here come first, then the ones that appear most often on local EPCs. Costs are the EPC's guide prices, not quotes.

  • Solar panels (PV)

    On 62% of EPCs here (England and Wales: 66%).

    Typical cost: £5,000–£8,000
  • Solar water heating

    On 54% of EPCs here (England and Wales: 56%).

    Typical cost: £4,000–£6,000
  • Floor insulation

    On 47% of EPCs here (England and Wales: 49%).

    Typical cost: £4,000–£6,000
  • New condensing boiler

    On 18% of EPCs here (England and Wales: 20%).

    Typical cost: £2,200–£3,000
  • Cavity wall insulation

    On 16% of EPCs here (England and Wales: 16%). 15% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500
  • Solid wall insulation (internal or external)

    On 14% of EPCs here (England and Wales: 24%). 11% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000

With all its recommended upgrades, 95% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £88 a year, at the prices used when each EPC was issued.

Map of CM1 and nearby areas

CM1's postcode sectors, and how it compares with the districts around it.

CM0, Burnham-on-Crouch: D 65CM11, Billericay: D 65CM12, Billericay: D 67CM13, Brentwood: D 66CM14, Brentwood: D 68CM15, Brentwood: D 65CM16, Epping: D 66CM17, Harlow: C 72CM18, Harlow: C 69CM19, Harlow: D 67CM2, Chelmsford: D 67CM20, Harlow: C 70CM21, Sawbridgeworth: D 68CM22, Bishop's Stortford: C 70CM23, Bishop's Stortford: C 71CM24, Stansted: C 71CM3, Chelmsford: D 65CM4, Ingatestone: D 64CM5, Ongar: D 64CM6, Dunmow: C 71CM7, Braintree: D 68CM77, Braintree: C 69CM8, Witham: C 70CM9, Maldon: D 67CM98: not enough EPCs to showCO2, Colchester: C 70CO5, Colchester: D 66CO6, Colchester: D 64CO9, Halstead: D 65EN9, Waltham Abbey: D 67IG10, Loughton: D 66IG5, Ilford: D 64IG6, Ilford: D 67IG7, Chigwell: D 67IG8, Woodford Green: D 64IG9, Buckhurst Hill: D 65RM1, Romford: D 68RM14, Upminster: D 62RM2, Romford: D 64RM3, Romford: D 68RM4, Romford: D 62RM5, Romford: D 64RM6, Romford: D 66RM7, Romford: D 67SG10, Much Hadham: D 61SG11, Ware: D 64SG12, Ware: D 66SG9, Buntingford: D 68SS11, Wickford: D 67SS12, Wickford: D 67SS13, Basildon: D 67SS14, Basildon: C 70SS15, Basildon: C 70SS3, Southend-on-Sea: D 66SS4, Rochford: D 68SS5, Hockley: D 66SS6, Rayleigh: D 66SS9, Leigh-on-Sea: D 62CM1 1: C 76CM1 2: D 68CM1 3: D 66CM1 4: D 66CM1 6: C 73CM1 7: D 67CM1 9: not enough EPCs to showCM1 3D 66CM1 4D 66CM1 7D 67CM2D 67CM3D 65CM4D 64CM5D 64CM1 2D 68CM1 3D 66CM1 4D 66CM1 6C 73CM2D 67CM3D 65CM4D 64CM5D 64
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 CM1 boundary Not enough EPCs

Bordering postcode districts

Common questions

What holds energy ratings back in CM1?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.

Are there grants for upgrades?

Some upgrades may qualify for government schemes, such as the Boiler Upgrade Scheme for heat pumps. Check current eligibility on GOV.UK.

How up to date is this?

We use the latest certificate for each home and refresh the data monthly. A certificate describes a home on the day it was assessed, so later improvements won't show until a new EPC is done.