Skip to content
EPCMap

EPC ratings in RM6, Romford

Postcode district in Barking and Dagenham · EPC ratings across Romford

Summary

Average rating

D66

Barking and Dagenham average: C 69

Homes in RM6 have an average EPC rating of D (66), a little below the Barking and Dagenham average of C (69). 45% of homes here have solid walls with no insulation.

RM6 has the joint lowest average rating of the 5 postcode districts in Barking and Dagenham. Flats and maisonettes rate best here, at C (71) on average; semi-detached houses rate lowest, at D (61).

Rated D or worse
54%
Barking and Dagenham: 47%
Typical yearly energy cost
£971
EPCs since 2021, at prices then
Built before 1930
12%

For landlords: 50% of privately rented homes here are below C (2,969 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the Barking and Dagenham average.

  • Band A, score 92 to 100: <1% of homes; Barking and Dagenham <1%.
  • Band B, score 81 to 91: 7% of homes; Barking and Dagenham 21%.
  • Band C, score 69 to 80: 38% of homes; Barking and Dagenham 31%.
  • Band D, score 55 to 68: 42% of homes; Barking and Dagenham 38%.
  • Band E, score 39 to 54: 11% of homes; Barking and Dagenham 8%.
  • Band F, score 21 to 38: 1% of homes; Barking and Dagenham <1%.
  • Band G, score 1 to 20: <1% of homes; Barking and Dagenham <1%.

Based on the latest energy performance certificate (EPC) for each of 9,936 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100.

Find the EPC for a home in RM6 → Search any address on the official EPC register on GOV.UK. Certificates are free to view and last 10 years. Need a new EPC in RM6? → You need one to sell or let a home. GOV.UK explains how to find an accredited assessor.

Postcode sectors in RM6

Smaller areas within RM6, each with its own page. They're also on the map.

Sectors with fewer than 30 homes on the EPC register aren't shown.

What homes here are like

What EPC assessors recorded when they visited homes in RM6.

Main heating

Gas boiler81%
Electric storage heaters9%
Other electric heating6%
Communal or district heating4%

Walls, roof and windows

Solid walls, not insulated45%
Cavity walls, not insulated14%
Cavity walls, insulated29%
Solid walls, insulated2%
Other walls (timber, system-built or modern)10%
Loft insulation under 100 mm (homes with a loft)34%
Double or triple glazing throughout91%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house1%D 62Barking and Dagenham: D 6868%
Semi-detached house14%D 61Barking and Dagenham: D 6376%
Terraced house41%D 64Barking and Dagenham: D 6564%
Bungalow3%D 58Barking and Dagenham: D 6481%
Flat or maisonette41%C 71Barking and Dagenham: C 7535%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

50%

of privately rented homes here are below C (2,969 homes)

Barking and Dagenham: 52%

  • 94% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (Barking and Dagenham: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in RM6

Upgrades that are unusually common here come first, then the ones that appear most often on local EPCs. Costs are the EPC's guide prices, not quotes.

  • Solid wall insulation (internal or external) More common here

    On 47% of EPCs here (England and Wales: 24%). 45% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Solar panels (PV)

    On 57% of EPCs here (England and Wales: 66%).

    Typical cost: £5,000–£8,000
  • Floor insulation

    On 49% of EPCs here (England and Wales: 49%).

    Typical cost: £4,000–£6,000
  • Solar water heating

    On 48% of EPCs here (England and Wales: 56%).

    Typical cost: £4,000–£6,000
  • New condensing boiler

    On 22% of EPCs here (England and Wales: 20%).

    Typical cost: £2,200–£3,000
  • Heating controls

    On 19% of EPCs here (England and Wales: 16%).

    Typical cost: £350–£450

With all its recommended upgrades, 94% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £204 a year, at the prices used when each EPC was issued.

Map of RM6 and nearby areas

RM6's postcode sectors, and how it compares with the districts around it.

CM14, Brentwood: D 68E12, Newham: D 66IG1, Ilford: D 67IG11, Barking: C 73IG2, Ilford: D 66IG3, Ilford: D 66IG4, Ilford: D 63IG5, Ilford: D 64IG6, Ilford: D 67IG7, Chigwell: D 67IG8, Woodford Green: D 64IG9, Buckhurst Hill: D 65RM1, Romford: D 68RM10, Dagenham: D 66RM11, Hornchurch: D 63RM12, Hornchurch: D 65RM2, Romford: D 64RM3, Romford: D 68RM4, Romford: D 62RM5, Romford: D 64RM7, Romford: D 67RM8, Dagenham: D 67RM9, Dagenham: C 69RM6 4: D 68RM6 5: D 66RM6 6: D 64RM6 4D 68RM6 5D 66RM6 6D 64IG2D 66IG6D 67RM7D 67RM6 4D 68RM6 5D 66RM6 6D 64IG2D 66IG3D 66IG6D 67RM7D 67
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 RM6 boundary Not enough EPCs

Bordering postcode districts

Common questions

What holds energy ratings back in RM6?

About 45% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.

Are there grants for upgrades?

Some upgrades may qualify for government schemes, such as the Boiler Upgrade Scheme for heat pumps. Check current eligibility on GOV.UK.

How up to date is this?

We use the latest certificate for each home and refresh the data monthly. A certificate describes a home on the day it was assessed, so later improvements won't show until a new EPC is done.