Skip to content
EPCMap

EPC ratings in CM6, Dunmow

Postcode district in Uttlesford

Summary

Average rating

C71

Uttlesford average: C 69

Homes in CM6 have an average EPC rating of C (71), a little above the Uttlesford average of C (69).

CM6 has the joint highest average rating of the 5 postcode districts in Uttlesford.

Rated D or worse
35%
Uttlesford: 43%
Typical yearly energy cost
£881
EPCs since 2021, at prices then
Built before 1930
11%

For landlords: 55% of privately rented homes here are below C (828 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the Uttlesford average.

  • Band A, score 92 to 100: 2% of homes; Uttlesford 2%.
  • Band B, score 81 to 91: 30% of homes; Uttlesford 27%.
  • Band C, score 69 to 80: 33% of homes; Uttlesford 29%.
  • Band D, score 55 to 68: 22% of homes; Uttlesford 27%.
  • Band E, score 39 to 54: 9% of homes; Uttlesford 12%.
  • Band F, score 21 to 38: 3% of homes; Uttlesford 3%.
  • Band G, score 1 to 20: <1% of homes; Uttlesford <1%.

Based on the latest energy performance certificate (EPC) for each of 10,565 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100.

Find the EPC for a home in CM6 → Search any address on the official EPC register on GOV.UK. Certificates are free to view and last 10 years. Need a new EPC in CM6? → You need one to sell or let a home. GOV.UK explains how to find an accredited assessor.

Postcode sectors in CM6

Smaller areas within CM6, each with its own page. They're also on the map.

Sectors with fewer than 30 homes on the EPC register aren't shown.

What homes here are like

What EPC assessors recorded when they visited homes in CM6.

Main heating

Gas boiler71%
Oil boiler14%
Heat pump7%
Electric storage heaters4%
Other electric heating3%
Communal or district heating1%

Walls, roof and windows

Solid walls, not insulated8%
Cavity walls, not insulated9%
Cavity walls, insulated38%
Solid walls, insulated1%
Other walls (timber, system-built or modern)45%
Loft insulation under 100 mm (homes with a loft)12%
Double or triple glazing throughout89%
Solar panels2%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house38%C 71Uttlesford: C 6936%
Semi-detached house24%C 70Uttlesford: D 6841%
Terraced house17%C 73Uttlesford: C 7027%
Bungalow7%D 64Uttlesford: D 6358%
Flat or maisonette14%C 74Uttlesford: C 7322%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

55%

of privately rented homes here are below C (828 homes)

Uttlesford: 63%

  • 88% of those could reach C with the upgrades listed on their EPC.
  • 4% are rated F or G, below today's minimum of E (Uttlesford: 3%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in CM6

Upgrades that are unusually common here come first, then the ones that appear most often on local EPCs. Costs are the EPC's guide prices, not quotes.

  • Solar panels (PV)

    On 76% of EPCs here (England and Wales: 66%).

    Typical cost: £5,000–£8,000
  • Solar water heating

    On 65% of EPCs here (England and Wales: 56%).

    Typical cost: £4,000–£6,000
  • Floor insulation

    On 33% of EPCs here (England and Wales: 49%).

    Typical cost: £4,000–£6,000
  • New condensing boiler

    On 19% of EPCs here (England and Wales: 20%).

    Typical cost: £2,200–£3,000
  • Heating controls

    On 11% of EPCs here (England and Wales: 16%).

    Typical cost: £350–£450
  • Solid wall insulation (internal or external)

    On 9% of EPCs here (England and Wales: 24%). 8% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000

With all its recommended upgrades, 92% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £72 a year, at the prices used when each EPC was issued.

Map of CM6 and nearby areas

CM6's postcode sectors, and how it compares with the districts around it.

CB10, Saffron Walden: D 67CB11, Saffron Walden: D 68CB21, Cambridge: D 66CB22, Cambridge: C 69CB9, Haverhill: C 70CM0, Burnham-on-Crouch: D 65CM1, Chelmsford: C 70CM11, Billericay: D 65CM12, Billericay: D 67CM13, Brentwood: D 66CM14, Brentwood: D 68CM15, Brentwood: D 65CM16, Epping: D 66CM17, Harlow: C 72CM18, Harlow: C 69CM19, Harlow: D 67CM2, Chelmsford: D 67CM20, Harlow: C 70CM21, Sawbridgeworth: D 68CM22, Bishop's Stortford: C 70CM23, Bishop's Stortford: C 71CM24, Stansted: C 71CM3, Chelmsford: D 65CM4, Ingatestone: D 64CM5, Ongar: D 64CM7, Braintree: D 68CM77, Braintree: C 69CM8, Witham: C 70CM9, Maldon: D 67CM98: not enough EPCs to showCO10, Sudbury: D 66CO2, Colchester: C 70CO3, Colchester: D 68CO4, Colchester: C 71CO5, Colchester: D 66CO6, Colchester: D 64CO8, Bures: D 62CO9, Halstead: D 65E4, Waltham Forest: D 66EN1, Enfield: D 65EN10, Broxbourne: D 68EN11, Hoddesdon: D 67EN2, Enfield: D 65EN3, Enfield: D 67EN4, Barnet: D 67EN6, Potters Bar: D 65EN7, Waltham Cross: C 69EN8, Waltham Cross: D 68EN9, Waltham Abbey: D 67IG10, Loughton: D 66IG7, Chigwell: D 67IP7, Ipswich: D 66N14, Enfield: D 65N21, Enfield: D 64RM4, Romford: D 62SG10, Much Hadham: D 61SG11, Ware: D 64SG12, Ware: D 66SG13, Hertford: D 68SG14, Hertford: D 68SG19, Sandy: D 67SG2, Stevenage: D 68SG7, Baldock: D 66SG8, Royston: D 67SG9, Buntingford: D 68SS11, Wickford: D 67SS4, Rochford: D 68SS5, Hockley: D 66CM6 1: C 70CM6 2: D 66CM6 3: C 70CM6 4: B 85CM6 5: not enough EPCs to showCM6 1C 70CM6 2D 66CM6 3C 70CM6 4B 85CM1C 70CM17C 72CM21D 68CM22C 70CM23C 71CM7D 68CM77C 69CM6 1C 70CM6 2D 66CM6 3C 70CM6 4B 85CM1C 70CM17C 72CM21D 68CM22C 70CM23C 71CM24C 71CM3D 65CM7D 68CM77C 69CO9D 65
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 CM6 boundary Not enough EPCs

Bordering postcode districts

Common questions

What holds energy ratings back in CM6?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.

Are there grants for upgrades?

Some upgrades may qualify for government schemes, such as the Boiler Upgrade Scheme for heat pumps. Check current eligibility on GOV.UK.

How up to date is this?

We use the latest certificate for each home and refresh the data monthly. A certificate describes a home on the day it was assessed, so later improvements won't show until a new EPC is done.