Skip to content
EPCMap

EPC ratings in HP22, Aylesbury

Postcode district in Buckinghamshire · EPC ratings across Aylesbury

Summary

Average rating

C71

Buckinghamshire average: D 68

Homes in HP22 have an average EPC rating of C (71), a little above the Buckinghamshire average of D (68).

HP22 has the joint highest average rating of the 25 postcode districts in Buckinghamshire.

Rated D or worse
37%
Buckinghamshire: 47%
Typical yearly energy cost
£886
EPCs since 2021, at prices then
Built before 1930
11%

For landlords: 62% of privately rented homes here are below C (721 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the Buckinghamshire average.

  • Band A, score 92 to 100: 2% of homes; Buckinghamshire <1%.
  • Band B, score 81 to 91: 37% of homes; Buckinghamshire 16%.
  • Band C, score 69 to 80: 25% of homes; Buckinghamshire 37%.
  • Band D, score 55 to 68: 25% of homes; Buckinghamshire 33%.
  • Band E, score 39 to 54: 10% of homes; Buckinghamshire 11%.
  • Band F, score 21 to 38: 2% of homes; Buckinghamshire 2%.
  • Band G, score 1 to 20: <1% of homes; Buckinghamshire <1%.

Based on the latest energy performance certificate (EPC) for each of 11,999 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100.

Find the EPC for a home in HP22 → Search any address on the official EPC register on GOV.UK. Certificates are free to view and last 10 years. Need a new EPC in HP22? → You need one to sell or let a home. GOV.UK explains how to find an accredited assessor.

Postcode sectors in HP22

Smaller areas within HP22, each with its own page. They're also on the map.

Sectors with fewer than 30 homes on the EPC register aren't shown.

What homes here are like

What EPC assessors recorded when they visited homes in HP22.

Main heating

Gas boiler83%
Oil boiler9%
Heat pump3%
Electric storage heaters3%
Other electric heating1%
Communal or district heating1%

Walls, roof and windows

Solid walls, not insulated11%
Cavity walls, not insulated10%
Cavity walls, insulated39%
Solid walls, insulated1%
Other walls (timber, system-built or modern)39%
Loft insulation under 100 mm (homes with a loft)17%
Double or triple glazing throughout92%
Solar panels1%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house32%C 71Buckinghamshire: D 6541%
Semi-detached house31%C 72Buckinghamshire: D 6637%
Terraced house18%C 73Buckinghamshire: D 6831%
Bungalow9%D 63Buckinghamshire: D 6259%
Flat or maisonette10%C 76Buckinghamshire: C 7317%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

62%

of privately rented homes here are below C (721 homes)

Buckinghamshire: 53%

  • 94% of those could reach C with the upgrades listed on their EPC.
  • 4% are rated F or G, below today's minimum of E (Buckinghamshire: 2%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in HP22

Upgrades that are unusually common here come first, then the ones that appear most often on local EPCs. Costs are the EPC's guide prices, not quotes.

  • Solar panels (PV)

    On 81% of EPCs here (England and Wales: 66%).

    Typical cost: £5,000–£8,000
  • Solar water heating

    On 72% of EPCs here (England and Wales: 56%).

    Typical cost: £4,000–£6,000
  • Floor insulation

    On 41% of EPCs here (England and Wales: 49%).

    Typical cost: £4,000–£6,000
  • New condensing boiler

    On 17% of EPCs here (England and Wales: 20%).

    Typical cost: £2,200–£3,000
  • Solid wall insulation (internal or external)

    On 12% of EPCs here (England and Wales: 24%). 11% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Cavity wall insulation

    On 11% of EPCs here (England and Wales: 16%). 10% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500

With all its recommended upgrades, 94% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £80 a year, at the prices used when each EPC was issued.

Map of HP22 and nearby areas

HP22's postcode sectors, and how it compares with the districts around it.

AL2, St. Albans: D 68AL3, St. Albans: D 66AL5, Harpenden: D 66HA5, Pinner: D 63HA6, Northwood: D 66HP1, Hemel Hempstead: D 68HP10, High Wycombe: D 67HP11, High Wycombe: C 71HP12, High Wycombe: D 66HP13, High Wycombe: D 68HP14, High Wycombe: D 64HP15, High Wycombe: D 65HP16, Great Missenden: D 62HP17, Aylesbury: C 70HP18, Aylesbury: C 70HP19, Aylesbury: C 71HP2, Hemel Hempstead: C 70HP20, Aylesbury: C 69HP21, Aylesbury: C 69HP23, Tring: D 66HP27, Princes Risborough: D 67HP3, Hemel Hempstead: D 68HP4, Berkhamsted: D 67HP5, Chesham: D 66HP6, Amersham: D 67HP7, Amersham: D 65HP8, Chalfont St. Giles: D 65HP9, Beaconsfield: D 68LU1, Luton: D 68LU2, Luton: D 67LU3, Luton: D 65LU4, Luton: D 66LU5, Dunstable: C 72LU6, Dunstable: D 67LU7, Leighton Buzzard: C 69MK1, Milton Keynes: D 66MK17, Milton Keynes: C 72MK18, Buckingham: C 69MK19, Milton Keynes: D 68MK2, Milton Keynes: C 70MK3, Milton Keynes: C 72MK4, Milton Keynes: C 74MK43, Bedford: C 71MK45, Bedford: C 70MK5, Milton Keynes: C 72MK6, Milton Keynes: C 69MK7, Milton Keynes: C 70MK8, Milton Keynes: C 77NN13, Brackley: C 69OX1, Oxford: D 68OX10, Wallingford: C 69OX11, Didcot: C 73OX13, Abingdon: C 70OX14, Abingdon: C 70OX17, Banbury: D 62OX2, Oxford: D 67OX25, Bicester: C 72OX26, Bicester: C 72OX27, Bicester: D 66OX3, Oxford: D 68OX33, Oxford: D 64OX39, Chinnor: C 70OX4, Oxford: D 68OX44, Oxford: D 65OX49, Watlington: D 63OX5, Kidlington: D 67OX9, Thame: C 69RG9, Henley-on-Thames: D 63SG17, Shefford: C 72SG5, Hitchin: C 70SL7, Marlow: D 65SL9, Gerrards Cross: D 67UB9, Uxbridge: D 67WD17, Watford: C 69WD18, Watford: C 72WD19, Watford: D 67WD24, Watford: D 67WD25, Watford: C 69WD3, Rickmansworth: D 65WD4, Kings Langley: D 66WD5, Abbots Langley: D 66HP22 0: B 84HP22 3: B 84HP22 4: D 61HP22 5: C 69HP22 6: D 64HP22 7: B 85HP22 9: not enough EPCs to showHP22 4D 61HP22 5C 69HP22 6D 64HP17C 70HP18C 70HP19C 71HP23D 66HP27D 67HP5D 66LU7C 69OX9C 69HP22 3B 84HP22 4D 61HP22 5C 69HP22 6D 64HP16D 62HP17C 70HP18C 70HP19C 71HP23D 66HP27D 67HP5D 66LU7C 69OX9C 69
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 HP22 boundary Not enough EPCs

Bordering postcode districts

Common questions

What holds energy ratings back in HP22?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.

Are there grants for upgrades?

Some upgrades may qualify for government schemes, such as the Boiler Upgrade Scheme for heat pumps. Check current eligibility on GOV.UK.

How up to date is this?

We use the latest certificate for each home and refresh the data monthly. A certificate describes a home on the day it was assessed, so later improvements won't show until a new EPC is done.