Skip to content
EPCMap

EPC ratings in HA6, Northwood

Postcode district in Hillingdon

Summary

Average rating

D66

Hillingdon average: D 67

Homes in HA6 have an average EPC rating of D (66), about the same as the Hillingdon average of D (67).

HA6 has the joint 2nd lowest average rating of the 7 postcode districts in Hillingdon. Flats and maisonettes rate best here, at C (70) on average; semi-detached houses rate lowest, at D (61).

Rated D or worse
55%
Hillingdon: 51%
Typical yearly energy cost
£1,179
EPCs since 2021, at prices then
Built before 1930
11%

For landlords: 50% of privately rented homes here are below C (1,590 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the Hillingdon average.

  • Band A, score 92 to 100: <1% of homes; Hillingdon <1%.
  • Band B, score 81 to 91: 10% of homes; Hillingdon 14%.
  • Band C, score 69 to 80: 36% of homes; Hillingdon 35%.
  • Band D, score 55 to 68: 38% of homes; Hillingdon 39%.
  • Band E, score 39 to 54: 14% of homes; Hillingdon 11%.
  • Band F, score 21 to 38: 2% of homes; Hillingdon 1%.
  • Band G, score 1 to 20: <1% of homes; Hillingdon <1%.

Based on the latest energy performance certificate (EPC) for each of 7,218 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100.

Find the EPC for a home in HA6 → Search any address on the official EPC register on GOV.UK. Certificates are free to view and last 10 years. Need a new EPC in HA6? → You need one to sell or let a home. GOV.UK explains how to find an accredited assessor.

Postcode sectors in HA6

Smaller areas within HA6, each with its own page. They're also on the map.

Sectors with fewer than 30 homes on the EPC register aren't shown.

What homes here are like

What EPC assessors recorded when they visited homes in HA6.

Main heating

Gas boiler86%
Electric storage heaters5%
Other electric heating4%
Communal or district heating3%
Heat pump2%

Walls, roof and windows

Solid walls, not insulated26%
Cavity walls, not insulated29%
Cavity walls, insulated32%
Solid walls, insulated1%
Other walls (timber, system-built or modern)13%
Loft insulation under 100 mm (homes with a loft)29%
Double or triple glazing throughout88%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house29%D 62Hillingdon: D 6267%
Semi-detached house13%D 61Hillingdon: D 6279%
Terraced house11%D 66Hillingdon: D 6654%
Bungalow4%D 58Hillingdon: D 5985%
Flat or maisonette43%C 70Hillingdon: C 7336%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

50%

of privately rented homes here are below C (1,590 homes)

Hillingdon: 49%

  • 89% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (Hillingdon: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in HA6

Upgrades that are unusually common here come first, then the ones that appear most often on local EPCs. Costs are the EPC's guide prices, not quotes.

  • Cavity wall insulation More common here

    On 30% of EPCs here (England and Wales: 16%). 29% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500
  • Solar panels (PV)

    On 55% of EPCs here (England and Wales: 66%).

    Typical cost: £5,000–£8,000
  • Floor insulation

    On 47% of EPCs here (England and Wales: 49%).

    Typical cost: £4,000–£6,000
  • Solar water heating

    On 35% of EPCs here (England and Wales: 56%).

    Typical cost: £4,000–£6,000
  • Solid wall insulation (internal or external)

    On 26% of EPCs here (England and Wales: 24%). 26% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • New condensing boiler

    On 22% of EPCs here (England and Wales: 20%).

    Typical cost: £2,200–£3,000

With all its recommended upgrades, 92% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £205 a year, at the prices used when each EPC was issued.

Map of HA6 and nearby areas

HA6's postcode sectors, and how it compares with the districts around it.

HA0, Wembley: C 70HA1, Harrow: C 71HA2, Harrow: D 67HA3, Harrow: D 66HA4, Ruislip: D 64HA5, Pinner: D 63HA7, Stanmore: D 67HP8, Chalfont St. Giles: D 65SL3, Slough: D 68SL9, Gerrards Cross: D 67UB10, Uxbridge: D 67UB9, Uxbridge: D 67WD17, Watford: C 69WD18, Watford: C 72WD19, Watford: D 67WD23, Bushey: D 68WD24, Watford: D 67WD25, Watford: C 69WD3, Rickmansworth: D 65WD6, Borehamwood: C 69HA6 1: D 64HA6 2: D 67HA6 3: D 67HA6 1D 64HA6 2D 67HA6 3D 67HA5D 63WD19D 67HA6 1D 64HA6 2D 67HA6 3D 67HA5D 63WD19D 67
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 HA6 boundary Not enough EPCs

Bordering postcode districts

Common questions

What holds energy ratings back in HA6?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.

Are there grants for upgrades?

Some upgrades may qualify for government schemes, such as the Boiler Upgrade Scheme for heat pumps. Check current eligibility on GOV.UK.

How up to date is this?

We use the latest certificate for each home and refresh the data monthly. A certificate describes a home on the day it was assessed, so later improvements won't show until a new EPC is done.