Skip to content
EPCMap

EPC ratings in CA10, Penrith

Postcode district in Westmorland and Furness · EPC ratings across Penrith

Summary

Average rating

D56

Westmorland and Furness average: D 62

Homes in CA10 have an average EPC rating of D (56), well below the Westmorland and Furness average of D (62). 40% of homes here were built before 1930, and 37% have solid walls with no insulation.

CA10 has the 3rd lowest average rating of the 21 postcode districts in Westmorland and Furness. 55% of homes are heated by oil boilers.

Rated D or worse
71%
Westmorland and Furness: 63%
Typical yearly energy cost
£1,776
EPCs since 2021, at prices then
Built before 1930
40%

For landlords: 90% of privately rented homes here are below C (673 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the Westmorland and Furness average.

  • Band A, score 92 to 100: <1% of homes; Westmorland and Furness <1%.
  • Band B, score 81 to 91: 10% of homes; Westmorland and Furness 9%.
  • Band C, score 69 to 80: 18% of homes; Westmorland and Furness 27%.
  • Band D, score 55 to 68: 27% of homes; Westmorland and Furness 38%.
  • Band E, score 39 to 54: 27% of homes; Westmorland and Furness 17%.
  • Band F, score 21 to 38: 13% of homes; Westmorland and Furness 6%.
  • Band G, score 1 to 20: 4% of homes; Westmorland and Furness 2%.

Based on the latest energy performance certificate (EPC) for each of 5,193 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100.

Find the EPC for a home in CA10 → Search any address on the official EPC register on GOV.UK. Certificates are free to view and last 10 years. Need a new EPC in CA10? → You need one to sell or let a home. GOV.UK explains how to find an accredited assessor.

Postcode sectors in CA10

Smaller areas within CA10, each with its own page. They're also on the map.

Sectors with fewer than 30 homes on the EPC register aren't shown.

What homes here are like

What EPC assessors recorded when they visited homes in CA10.

Main heating

Oil boiler55%
Gas boiler15%
Electric storage heaters12%
Heat pump11%
Other electric heating5%
Solid fuel or wood1%

Walls, roof and windows

Solid walls, not insulated37%
Cavity walls, not insulated7%
Cavity walls, insulated31%
Solid walls, insulated8%
Other walls (timber, system-built or modern)17%
Loft insulation under 100 mm (homes with a loft)14%
Double or triple glazing throughout84%
Solar panels2%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house35%D 55Westmorland and Furness: D 6069%
Semi-detached house24%D 55Westmorland and Furness: D 6175%
Terraced house22%D 56Westmorland and Furness: D 6275%
Bungalow16%D 59Westmorland and Furness: D 6171%
Flat or maisonette3%D 61Westmorland and Furness: D 6857%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

90%

of privately rented homes here are below C (673 homes)

Westmorland and Furness: 69%

  • 94% of those could reach C with the upgrades listed on their EPC.
  • 16% are rated F or G, below today's minimum of E (Westmorland and Furness: 6%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in CA10

Upgrades that are unusually common here come first, then the ones that appear most often on local EPCs. Costs are the EPC's guide prices, not quotes.

  • Modern storage heaters More common here

    On 14% of EPCs here (England and Wales: 6%). 17% of homes here are heated by electricity.

    Typical cost: £1,200–£1,800
  • Hot water cylinder insulation More common here

    On 17% of EPCs here (England and Wales: 8%).

    Typical cost: £15–£30
  • Roof insulation (flat roof or room in roof) More common here

    On 12% of EPCs here (England and Wales: 7%).

    Typical cost: £900–£1,500
  • Solid wall insulation (internal or external) More common here

    On 40% of EPCs here (England and Wales: 24%). 37% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Solar panels (PV)

    On 87% of EPCs here (England and Wales: 66%).

    Typical cost: £5,000–£8,000
  • Solar water heating

    On 83% of EPCs here (England and Wales: 56%).

    Typical cost: £4,000–£6,000

With all its recommended upgrades, 87% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £400 a year, at the prices used when each EPC was issued.

Map of CA10 and nearby areas

CA10's postcode sectors, and how it compares with the districts around it.

BD23, Skipton: D 63BD24, Settle: D 62CA1, Carlisle: D 67CA11, Penrith: D 65CA12, Keswick: D 61CA13, Cockermouth: D 64CA14, Workington: D 66CA15, Maryport: D 64CA16, Appleby-in-Westmorland: D 60CA17, Kirkby Stephen: D 57CA18, Ravenglass: E 51CA19, Holmrook: E 48CA2, Carlisle: D 67CA20, Seascale: D 59CA21, Beckermet: D 59CA22, Egremont: D 64CA23, Cleator: D 56CA24, Moor Row: D 63CA25, Cleator Moor: D 65CA26, Frizington: D 64CA27, St. Bees: D 65CA28, Whitehaven: D 66CA3, Carlisle: D 68CA4, Carlisle: D 62CA5, Carlisle: D 63CA6, Carlisle: D 58CA7, Wigton: D 59CA8, Brampton: D 59CA9, Alston: D 55DG12: not enough EPCs to showDG14: not enough EPCs to showDG16: not enough EPCs to showDH1, Durham: C 69DH2, Chester le Street: C 69DH3, Chester le Street: D 68DH6, Durham: C 69DH7, Durham: D 68DH8, Consett: D 67DH9, Stanley: D 67DL10, Richmond: D 64DL11, Richmond: E 50DL12, Barnard Castle: D 61DL13, Bishop Auckland: D 56DL14, Bishop Auckland: D 68DL15, Crook: D 67DL16, Spennymoor: C 71DL17, Ferryhill: D 67DL2, Darlington: C 70DL3, Darlington: D 64DL4, Shildon: D 67DL5, Newton Aycliffe: C 70DL7, Northallerton: D 66DL8, Bedale: D 60DL9, Catterick Garrison: C 70HG3, Harrogate: D 67HG4, Ripon: D 64LA10, Sedbergh: D 57LA11, Grange-Over-Sands: D 60LA12, Ulverston: D 61LA13, Barrow-in-Furness: D 65LA14, Barrow-in-Furness: D 64LA15, Dalton-in-Furness: D 62LA16, Askam-in-Furness: D 64LA17, Kirkby-in-Furness: D 57LA18, Millom: D 59LA19, Millom: E 44LA2, Lancaster: D 62LA20, Broughton-in-Furness: E 51LA21, Coniston: D 58LA22, Ambleside: D 58LA23, Windermere: D 61LA5, Carnforth: D 63LA6, Carnforth: D 62LA7, Milnthorpe: D 60LA8, Kendal: D 58LA9, Kendal: D 67NE1, Newcastle upon Tyne: C 73NE10, Gateshead: D 67NE11, Gateshead: D 67NE12, Newcastle upon Tyne: C 70NE13, Newcastle upon Tyne: C 76NE15, Newcastle upon Tyne: C 70NE16, Newcastle upon Tyne: D 66NE17, Newcastle upon Tyne: D 66NE18, Newcastle upon Tyne: E 51NE19, Newcastle upon Tyne: E 51NE2, Newcastle upon Tyne: D 66NE20, Newcastle upon Tyne: D 67NE21, Blaydon-on-Tyne: D 68NE23, Cramlington: C 70NE3, Newcastle upon Tyne: D 67NE39, Rowlands Gill: D 66NE4, Newcastle upon Tyne: C 69NE40, Ryton: D 68NE41, Wylam: D 63NE42, Prudhoe: D 68NE43, Stocksfield: D 60NE44, Riding Mill: D 58NE45, Corbridge: D 67NE46, Hexham: D 65NE47, Hexham: E 52NE48, Hexham: E 53NE49, Haltwhistle: D 60NE5, Newcastle upon Tyne: C 70NE6, Newcastle upon Tyne: D 68NE7, Newcastle upon Tyne: D 66NE8, Gateshead: C 69NE9, Gateshead: D 66NE92: not enough EPCs to showCA10 1: D 56CA10 2: D 58CA10 3: E 54CA10 1D 56CA10 2D 58CA12D 61CA16D 60CA17D 57CA4D 62CA5D 63CA7D 59LA22D 58CA10 1D 56CA10 2D 58CA10 3E 54CA11D 65CA12D 61CA16D 60CA17D 57CA4D 62CA5D 63CA7D 59CA9D 55DL12D 61LA21D 58LA22D 58LA23D 61LA8D 58
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 CA10 boundary Not enough EPCs

Bordering postcode districts

Common questions

What holds energy ratings back in CA10?

About 37% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. 40% were built before 1930. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.

Are there grants for upgrades?

Some upgrades may qualify for government schemes, such as the Boiler Upgrade Scheme for heat pumps. Check current eligibility on GOV.UK.

How up to date is this?

We use the latest certificate for each home and refresh the data monthly. A certificate describes a home on the day it was assessed, so later improvements won't show until a new EPC is done.