Skip to content
EPCMap

EPC ratings in SP10, Andover

Postcode district in Test Valley · EPC ratings across Andover

Summary

Average rating

C69

Test Valley average: D 68

Homes in SP10 have an average EPC rating of C (69), about the same as the Test Valley average of D (68).

SP10 has the joint 2nd highest average rating of the 5 postcode districts in Test Valley.

Rated D or worse
42%
Test Valley: 44%
Typical yearly energy cost
£1,041
EPCs since 2021, at prices then
Built before 1930
7%

For landlords: 35% of privately rented homes here are below C (1,759 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the Test Valley average.

  • Band A, score 92 to 100: <1% of homes; Test Valley <1%.
  • Band B, score 81 to 91: 7% of homes; Test Valley 21%.
  • Band C, score 69 to 80: 51% of homes; Test Valley 35%.
  • Band D, score 55 to 68: 36% of homes; Test Valley 30%.
  • Band E, score 39 to 54: 6% of homes; Test Valley 11%.
  • Band F, score 21 to 38: <1% of homes; Test Valley 2%.
  • Band G, score 1 to 20: <1% of homes; Test Valley <1%.

Based on the latest energy performance certificate (EPC) for each of 12,355 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100.

Find the EPC for a home in SP10 → Search any address on the official EPC register on GOV.UK. Certificates are free to view and last 10 years. Need a new EPC in SP10? → You need one to sell or let a home. GOV.UK explains how to find an accredited assessor.

Postcode sectors in SP10

Smaller areas within SP10, each with its own page. They're also on the map.

Sectors with fewer than 30 homes on the EPC register aren't shown.

What homes here are like

What EPC assessors recorded when they visited homes in SP10.

Main heating

Gas boiler88%
Electric storage heaters6%
Communal or district heating2%
Other electric heating2%

Walls, roof and windows

Solid walls, not insulated2%
Cavity walls, not insulated23%
Cavity walls, insulated63%
Other walls (timber, system-built or modern)12%
Loft insulation under 100 mm (homes with a loft)12%
Double or triple glazing throughout94%
Solar panels1%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house16%D 66Test Valley: D 6662%
Semi-detached house17%D 66Test Valley: D 6853%
Terraced house35%C 69Test Valley: C 7039%
Bungalow8%D 64Test Valley: D 6067%
Flat or maisonette25%C 73Test Valley: C 7419%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

35%

of privately rented homes here are below C (1,759 homes)

Test Valley: 54%

  • 93% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (Test Valley: 3%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in SP10

Upgrades that are unusually common here come first, then the ones that appear most often on local EPCs. Costs are the EPC's guide prices, not quotes.

  • Solar panels (PV)

    On 73% of EPCs here (England and Wales: 66%).

    Typical cost: £5,000–£8,000
  • Solar water heating

    On 66% of EPCs here (England and Wales: 56%).

    Typical cost: £4,000–£6,000
  • Floor insulation

    On 54% of EPCs here (England and Wales: 49%).

    Typical cost: £4,000–£6,000
  • New condensing boiler

    On 27% of EPCs here (England and Wales: 20%).

    Typical cost: £2,200–£3,000
  • Cavity wall insulation

    On 24% of EPCs here (England and Wales: 16%). 23% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500
  • Loft insulation top-up

    On 16% of EPCs here (England and Wales: 12%). 12% of homes with a loft have less than 100 mm of insulation.

    Typical cost: £100–£350

With all its recommended upgrades, 97% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £137 a year, at the prices used when each EPC was issued.

Map of SP10 and nearby areas

SP10's postcode sectors, and how it compares with the districts around it.

RG28, Whitchurch: D 68SN8, Marlborough: D 61SO20, Stockbridge: D 59SO21, Winchester: D 64SP11, Andover: C 71SP10 1: C 69SP10 2: C 69SP10 3: D 68SP10 4: C 70SP10 5: D 68SP10 1C 69SP10 2C 69SP10 4C 70SP10 5D 68SP11C 71SP10 1C 69SP10 2C 69SP10 3D 68SP10 4C 70SP10 5D 68SP11C 71
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 SP10 boundary Not enough EPCs

Bordering postcode districts

Common questions

What holds energy ratings back in SP10?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.

Are there grants for upgrades?

Some upgrades may qualify for government schemes, such as the Boiler Upgrade Scheme for heat pumps. Check current eligibility on GOV.UK.

How up to date is this?

We use the latest certificate for each home and refresh the data monthly. A certificate describes a home on the day it was assessed, so later improvements won't show until a new EPC is done.